Produktbeschreibung
1.8° 57mm hybrides StepperMotor-NEMA23
Genaral Bedingung:
Jobstepp-Winkel ------------------- 1.8° ± 5%
Temperatur-Anstieg ------------- 80° Maximal
Umgebende Temperatur -------- -20° ~+50°
Isolierungs-Widerstand--------- 100 MΩ Min., 500VDC
Spannungsfestigkeit: ------------ 500VAC fü R 1minute
Welle-Radialstrahl-Spiel --------------- 0.02Max. (450g-load)
Welle-axiales Spiel ----------------- 0.08Max. (450g-load)
Max. Radialkraft----------------- 28N (20mm vom Flansch)
Max. Axiale Kraft------------------- 10N
| Modell Nr. | Jobstepp-Winkel | Bewegungslä Nge | Aktuell /Phase | Widerstand /Phase | Induktanz /Phase | Holding-Drehkraft | # von den Leitungskabeln | Rasten-Drehkraft | Lä Ufer-Schwungkraft | Masse |
| (° ) | (L) mm | A | Ω | mH | N. M | Nr. | g. Cm | g. Cm | Kilogramm | |
| JK57H41-1006 | 1.8 | 41 | 1 | 5.2 | 5.5 | 0.4 | 6 | 250 | 150 | 0.47 |
| JK57H41-0604 | 1.8 | 41 | 0.6 | 12 | 24 | 0.55 | 4 | 250 | 150 | 0.47 |
| JK57H41-2004 | 1.8 | 41 | 2 | 1.2 | 2.5 | 0.55 | 4 | 250 | 150 | 0.47 |
| JK57H45-0604 | 1.8 | 45 | 0.6 | 12 | 26 | 0.8 | 4 | 280 | 190 | 0.52 |
| JK57H45-2504 | 1.8 | 45 | 2.5 | 1.0 | 2.2 | 0.8 | 4 | 280 | 190 | 0.52 |
| JK57H51-0604 | 1.8 | 51 | 0.6 | 13 | 28 | 1.1 | 4 | 300 | 230 | 0.59 |
| JK57H51-2504 | 1.8 | 51 | 2.5 | 1.2 | 3.2 | 1.1 | 4 | 300 | 230 | 0.59 |
| JK57H51-0806 | 1.8 | 51 | 0.8 | 6.8 | 9.2 | 0.62 | 6 | 300 | 230 | 0.59 |
| JK57H56-1506 | 1.8 | 56 | 1.5 | 3.2 | 5.5 | 0.9 | 6 | 350 | 280 | 0.68 |
| JK57H56-2504 | 1.8 | 56 | 2.5 | 1.3 | 4.2 | 1.1 | 4 | 350 | 280 | 0.68 |
| JK57H56-3004 | 1.8 | 56 | 3 | 0.8 | 2.4 | 1.1 | 4 | 350 | 280 | 0.68 |
| JK57H56-4204 | 1.8 | 56 | 4.2 | 0.4 | 1.2 | 1.1 | 4 | 350 | 280 | 0.68 |
| JK57H64-1004 | 1.8 | 64 | 1.0 | 7.5 | 20 | 1.5 | 4 | 500 | 380 | 0.85 |
| JK57H64-2504 | 1.8 | 64 | 2.5 | 1.5 | 4.5 | 1.5 | 4 | 500 | 380 | 0.85 |
| JK57H64-3004 | 1.8 | 64 | 3.0 | 0.8 | 2.3 | 1.5 | 4 | 500 | 380 | 0.85 |
| JK57H64-4204 | 1.8 | 64 | 4.2 | 0.55 | 1.2 | 1.5 | 4 | 500 | 380 | 0.85 |
| JK57H76-1506 | 1.8 | 76 | 1.5 | 4.5 | 9.2 | 1.4 | 6 | 600 | 440 | 1.1 |
| JK57H76-2504 | 1.8 | 76 | 2.5 | 1.8 | 6.5 | 1.8 | 4 | 600 | 440 | 1.1 |
| JK57H76-3004 | 1.8 | 76 | 3.0 | 1.0 | 3.5 | 1.8 | 4 | 600 | 440 | 1.1 |
| JK57H76-4204 | 1.8 | 76 | 4.2 | 0.6 | 1.8 | 1.8 | 4 | 600 | 440 | 1.1 |
| JK57H112-3004 | 1.8 | 112 | 3.0 | 1.6 | 6.8 | 2.8 | 4 | 1200 | 800 | 1.4 |
| JK57H112-4204 | 1.8 | 112 | 4.2 | 0.9 | 3.8 | 2.8 | 4 | 1200 | 800 | 1.4 |